1999-2006.5 Silverado Control Arms and Manual Rack Kit (Lightweight)

The Skyview Racing (KIT)is mainly a bolt in suspension package for 99-2006.5 GM Trucks. Some fabrication work required for steering if headers need more clearance, but in general this is a bolt in kit.

• This kit is intended to be used with lightweight 1st gen F body spindles and brake kit
• Constructed of 4130 Chrome Moly Steel
• Professionally TIG welded
• These A-Arms feature adjustable Heim ends and High Quality Ball Joints.
• Upper arms 1″ x 0.65 tubing
• Lower Arms 1″-1/4 x 0.95 tubing
• Powdercoated silver vein
• Setup for manual rack & pinion steering
• Designed for 6″ ride height from rocker to ground

INSTALLATION INSTRUCTIONS
-INSTALL UPPER CONTROL ARMS WITH 1/2-20 BOLTS AND NUTS SUPPLIED. UPPER ARMS WILL CENTER IN BUCKET WITH THE 3/4 SPACERS PROVIDED
-INSTALL LOWER CONTROL ARMS USING FACTORY LOWER BOLTS. THE FRONT LOWER SPACERS ARE 1-3/16 AND THE REAR LOWER SPACERS ARE 1-3/8 (YOU WILL HAVE TO SAND GALVANIZED COATING OFF FACTORY BOLTS TO FIT THROUGH SPACERS)
-THIS KIT IS DESIGNED FOR A 6″ RIDE HEIGHT. USING THE TEMPLATE PROVIDED FOR THE FACTORY SHOCK MOUNT DRILL 3/8 HOLES IN SHOCK TOWER AND CUT CENTER OUT WITH PLASMA OR HOLE SAW TO BOLT THE UPPER SHOCK MOUNT BUCKET TO.
-REMOVE FACTORY POWER STEERING AND RACK FROM TRUCK
-BOLT UP 3/8 PLATE MANUAL RACK MOUNT TO FACTORY MOUNT LOCATION
-INSTALL RACK WITH BILLET CLAMP PROVIDED
-STEERING STABILIZER TAB/HEIM BOLTS TO DRIVERS SIDE FACTORY ENGINE MOUNT

Shipping, Billed Separately after Checkout.