1999-2006.5 Silverado Control Arms for Manual Rack (Lightweight) AFX spindle conversion

Description

• This kit has to be used with AFX spindle and brake kit
• 5×4.75 and 5×4.5 bolt p[attern only
• Constructed of 4130 Chrome Moly Steel
• Professionally TIG welded
• These A-Arms feature adjustable Heim ends and High Quality Ball Joints.
• Upper arms 1″ x 0.65 tubing
• Lower Arms 1″-1/4 x 0.95 tubing
• Powdercoated silver vein

INSTALLATION INSTRUCTIONS
-INSTALL UPPER CONTROL ARMS WITH 1/2-20 BOLTS AND NUTS SUPPLIED. UPPER ARMS WILL CENTER IN BUCKET WITH THE 3/4 SPACERS PROVIDED
-INSTALL LOWER CONTROL ARMS USING FACTORY LOWER BOLTS. THE FRONT LOWER SPACERS ARE 1-3/16 AND THE REAR LOWER SPACERS ARE 1-3/8 (YOU WILL HAVE TO SAND GALVANIZED COATING OFF FACTORY BOLTS TO FIT THROUGH SPACERS)
-THIS KIT IS DESIGNED FOR A 6″ RIDE HEIGHT. USING THE TEMPLATE PROVIDED FOR THE FACTORY SHOCK MOUNT DRILL 3/8 HOLES IN SHOCK TOWER AND CUT CENTER OUT WITH PLASMA OR HOLE SAW TO BOLT THE UPPER SHOCK MOUNT BUCKET TO.